In this article, you will learn how to update the walls and room settings. When using the Floorplan view, you can drag the wall to change the room sizes.

You can also set the wall and room settings manually using the steps below.

Wall Settings

This section will guide you on how to update a single wall’s height settings. This configuration is useful when you are updating a single wall rather than the whole room.

1. Open the Floorplan/3D Renderer.

2. Find and click the Wall that you want to update.

3. After selecting the wall, the Wall & Rooms tab will enable the Height Toggle bar. Move the Toggle to the left to decrease the wall height or to the right to increase. You can also enter the height directly in the Height field next to the Toggle bar.

4. Click the Save button to apply the changes

Room Settings

This section will guide you on how to update the room’s ceiling height, light intensity, room color. When updated, the changes will be applied to the entire room.

1. Open the Floorplan/3D Renderer.

2. Find and click the Room that you want to update.

3. After selecting the wall, the Wall & Rooms tab will enable additional settings.

  • Ceiling Height

  • Light Intensity

  • Room Color

4. Move the Toggle to the left to decrease height and intensity or to the right to increase. You can also enter the height/intensity directly in the Height/Intensity field next to the Toggle bar.

5. To change the room color, click on the Color section box, and select the preferred color.

6. Click the Save button to apply the changes.

Did this answer your question?